Santa Fe Springs, CA 90670, USA TEL: 562.944.6391

CLOSE

Deck Color Seal (A-1100) Standard
Deck Color Seal (A-1100) Standard
1/ 1
Home / NEW PRODUCT / Deck Color Seal (A-1100) Standard

Deck Color Seal (A-1100) Standard

A-1100 Clear Sealer for Concrete or Texture

  • A-1100 is a Premium, Quick Drying, 100% Acrylic Pigmented Sealer formulated for sealing concrete and wood to provide resistance against water, alkalis, acids, ultra-violet light, and staining.

Americrete Sealer Details

A-1100 Specification

Advantages

  • UV Resistant
  • Fast Drying
  • Water Base
  • Easy Clean-Up
  • Chemical Resistant
  • Alkali and Moisture Resistant
  • Excellent Hide and Color Retention
  • Passes ASTM D2047-82
  • Resistant to Ponding Water

Uses

  • Concrete Floors
  • Pool Decks
  • Patios
  • A-16000 Waterproofing System
  • A-9000 Waterproofing Deck System
  • Wood decks and walkways
  • Stucco

Finish & Surface Preparation

  • Satin Sheen
  • For maximum durability, the surface must be clean, free of dirt, oil, chalk and other foreign material.

Concrete, concrete decks, concrete floors and concrete walkways

  1. New concrete must age for a minimum of 30 days.
  2. Cool temperatures and high humidity may require a longer cure time.
  3. Remove all grease, oil, and wax with T.S.P. solution. (One pound of T.S.P. to 1 gallon of water.)
  4. Scrub with a stiff broom until the surface is thoroughly clean.
  5. Rinse thoroughly with clear water. If necessary, etch all unpainted cement with A-250 acid etching gel, let stand five minutes then rinse clean with water.
  6. After etching, neutralize the acid with baking soda or soda ash then rinse thoroughly with water. A properly etched concrete surface should resemble the texture of medium sandpaper. Let dry thoroughly before applying the coating.

Priming

  • A-1100 may be used as its own primer.
  • To use as a primer, add 1-pint water to 1 gallon A-1100.

Previously Painted Surfaces

  • Clean all surfaces and roughen all glossy surfaces by sanding.
  • Remove all peeling, loose or blistered paint by scraping and wire brushing.
  • Remove all chlorinated rubber and hydrocarbon finishes by sandblasting.
  • Clean all surfaces thoroughly with a T.S.P solution and then rinse thoroughly with water.

Glossy Surfaces

  • Roughen gloss by sanding; then wash with a T.S.P. solution and rinse thoroughly with water.

Coverage

  • A-1100 may be rolled, brushed or sprayed.
  • The coverage will vary, up to 300 square feet per gallon on a smooth surface and between 150-250 square feet per gallon on a rough or textured surface. (Product may be thinned with a small amount of water, 2 coats are recommended.)

How to Apply

Application

  • Box and mix all containers together to ensure consistent color.
  • Neatly cut-in all edges with a brush and roll the main area using a 1/2″ nap, good quality roller cover.
  • Be sure to spread evenly in a “V” pattern, rolling in both directions.
  • It is best not to apply in the hot sun or above 95 degrees.
  • Thinning slightly with water and applying thin coats will help avoid streaks in direct sun.

Drying Time

  • Allow four (4) hours between coats and light foot traffic.
  • Normal foot traffic after twenty-four (24) hours.
  • No vehicle traffic without sealer.
  • Allow forty-eight (48) hours before placing heavy objects on the surface.

Clean-up

  • Warm water and soap.

Temperature/Weather

  • Do not install any Americrete product if the temperature is below 55 degrees or in extreme heat.
  • Rain may damage uncured Americrete products.
  • If inclement weather threatens, cover deck to protect the new application.
  • Do not allow any Americrete product to FREEZE.

Maintenance

  • Most Stains will clean-up with T.S.P, a brush, and water.
  • We recommend a re-coat every 3-5 years,

A-1100 Color Card

Americrete Color Card 1100

  • A-1100 Specification

  • How to Apply

  • A-1100 Color Card

Advantages

  • UV Resistant
  • Fast Drying
  • Water Base
  • Easy Clean-Up
  • Chemical Resistant
  • Alkali and Moisture Resistant
  • Excellent Hide and Color Retention
  • Passes ASTM D2047-82
  • Resistant to Ponding Water

Uses

  • Concrete Floors
  • Pool Decks
  • Patios
  • A-16000 Waterproofing System
  • A-9000 Waterproofing Deck System
  • Wood decks and walkways
  • Stucco

Finish & Surface Preparation

  • Satin Sheen
  • For maximum durability, the surface must be clean, free of dirt, oil, chalk and other foreign material.

Concrete, concrete decks, concrete floors and concrete walkways

  1. New concrete must age for a minimum of 30 days.
  2. Cool temperatures and high humidity may require a longer cure time.
  3. Remove all grease, oil, and wax with T.S.P. solution. (One pound of T.S.P. to 1 gallon of water.)
  4. Scrub with a stiff broom until the surface is thoroughly clean.
  5. Rinse thoroughly with clear water. If necessary, etch all unpainted cement with A-250 acid etching gel, let stand five minutes then rinse clean with water.
  6. After etching, neutralize the acid with baking soda or soda ash then rinse thoroughly with water. A properly etched concrete surface should resemble the texture of medium sandpaper. Let dry thoroughly before applying the coating.

Priming

  • A-1100 may be used as its own primer.
  • To use as a primer, add 1-pint water to 1 gallon A-1100.

Previously Painted Surfaces

  • Clean all surfaces and roughen all glossy surfaces by sanding.
  • Remove all peeling, loose or blistered paint by scraping and wire brushing.
  • Remove all chlorinated rubber and hydrocarbon finishes by sandblasting.
  • Clean all surfaces thoroughly with a T.S.P solution and then rinse thoroughly with water.

Glossy Surfaces

  • Roughen gloss by sanding; then wash with a T.S.P. solution and rinse thoroughly with water.

Coverage

  • A-1100 may be rolled, brushed or sprayed.
  • The coverage will vary, up to 300 square feet per gallon on a smooth surface and between 150-250 square feet per gallon on a rough or textured surface. (Product may be thinned with a small amount of water, 2 coats are recommended.)

Application

  • Box and mix all containers together to ensure consistent color.
  • Neatly cut-in all edges with a brush and roll the main area using a 1/2″ nap, good quality roller cover.
  • Be sure to spread evenly in a “V” pattern, rolling in both directions.
  • It is best not to apply in the hot sun or above 95 degrees.
  • Thinning slightly with water and applying thin coats will help avoid streaks in direct sun.

Drying Time

  • Allow four (4) hours between coats and light foot traffic.
  • Normal foot traffic after twenty-four (24) hours.
  • No vehicle traffic without sealer.
  • Allow forty-eight (48) hours before placing heavy objects on the surface.

Clean-up

  • Warm water and soap.

Temperature/Weather

  • Do not install any Americrete product if the temperature is below 55 degrees or in extreme heat.
  • Rain may damage uncured Americrete products.
  • If inclement weather threatens, cover deck to protect the new application.
  • Do not allow any Americrete product to FREEZE.

Maintenance

  • Most Stains will clean-up with T.S.P, a brush, and water.
  • We recommend a re-coat every 3-5 years,

Americrete Color Card 1100